LTC6257HMS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC6257 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 1.8/5V |
| Operating Supply Current | 65μA |
| Supply Current-Max | 0.36mA |
| Slew Rate | 1.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 5nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.25V ±0.9V~2.625V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 6.5MHz |
| Unity Gain BW-Nom | 6500 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.06μA |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Micropower | YES |
| -3db Bandwidth | 4.5MHz |
| Bias Current-Max (IIB) @25C | 0.05μA |
| Nominal Gain Bandwidth Product | 6.5MHz |
| Height Seated (Max) | 1.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6257HMS#PBF Overview
Op amp is packaged in 16-TFSOP (0.118, 3.00mm Width) case. An op amp ic of the General Purpose type. A Tube case is used for delivering the op amp. A total of 16 terminations have been reported in the past few weeks. A total of 16 pins are located on this board. Please take in mind that op amp should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 16 pins on it. The input offset voltage is 100μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . This op amp can operate from a supply current at 65μA. It is recommended to keep the voltage gain at 106.02dB at all times. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. There is a rating of 4 for the operating supply voltage of the buffer op amp.
LTC6257HMS#PBF Features
16 Pins
supply voltage of 5V
106.02dB voltage gain
Output Type: Rail-to-Rail
LTC6257HMS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6257HMS#PBF Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Large motor controllers
- Active probe
- Video data acquisition
- Voltage regulation circuit
- Portable media players
- Portable electronic products powered by batteries
- Comparator
- Integrator circuits
- Strain gauges
