Parameters |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Package / Case |
QFN EP |
Number of Pins |
16 |
Resistance |
230Ohm |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Operating Supply Voltage |
3V |
Number of Elements |
1 |
Number of Channels |
1 |
Max Supply Voltage |
3.5V |
Min Supply Voltage |
2.85V |
Current - Output |
10mA |
Slew Rate |
4500 V/μs |
Common Mode Rejection Ratio |
45 dB |
Input Offset Voltage (Vos) |
2mV |
Bandwidth |
1.3 GHz |
Voltage Gain |
20.6dB |
Power Supply Rejection Ratio (PSRR) |
55dB |
Nominal Gain Bandwidth Product |
1.3 GHz |
Number of Amplifiers |
1 |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
LTC6401CUD-20#PBF Overview
A QFN EP case is used to package the op amp. Linear amplifier includes 16 pins. There is an input offset voltage of 2mV for this buffer op amp. Keeping the voltage gain at 20.6dB is the best course of action. Buffer op amp is equipped with 1 channels on the device. In order for this buffer op amp to function, it should have a temperature of at least 0°C degrees Celsius. At temperatures greater than 70°C, op amp should not be used. This linear amplifier has a total of 1 elements. The operating supply voltage of instrumentation amplifier is rated 3V voltage. I would like to point out that this electrical component is capable of working from a voltage below 3.5V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.85V at all times. It is recommended to keep the instrumentation amplifier resistance within the range of 230Ohm. On the linear amplifier, there are 1 amplifiers.
LTC6401CUD-20#PBF Features
20.6dB voltage gain
Resistance of 230Ohm
LTC6401CUD-20#PBF Applications
There are a lot of Analog Devices, Inc. LTC6401CUD-20#PBF Instrumentational OP Amps applications.
- Home audio systems
- Cinema or auditorium audio system
- Comparator
- RF cable systems
- Thermocouples
- Large motor controllers
- Subtraction operation circuits
- Fission chambers
- Test and measurement instruments
- Hand-held batteries