LTC6401IUD-20#PBF
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | ADC Driver |
| Resistance | 230Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Data Acquisition |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6401 |
| Pin Count | 16 |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.5V |
| Min Supply Voltage | 2.85V |
| Output Current | 10mA |
| Slew Rate | 4500 V/μs |
| Common Mode Rejection Ratio | 45 dB |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.3 GHz |
| Voltage Gain | 20.6dB |
| Power Supply Rejection Ratio (PSRR) | 55dB |
| Nominal Gain Bandwidth Product | 1.3 GHz |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Radiation Hardening | No |
LTC6401IUD-20#PBF Overview
This product is packaged in a Tube package.A great ADC Driver at a great price.Dispatched with the 16-WFQFN Exposed Pad package.There is a mounting of the part in the Surface Mount direction.Mostly, it is used in Data Acquisition.This device was designed with a LTC6401 as the base part number.Amplification is achieved using 1 functions here.There are 16 terminals in total, which has their own funcitions.Peak relow should be conducted with the iron temperature under 260.16 pins are present in total in the part.It is recommended that a supply voltage of 3V is used to run this amplifier fully.I would like to present you with a 16-pin amplifier for your custom needs.-40°C is the lowest temperature at which the device can operate.As an astounding feature, this part is capable of operating with a temperature as high as 85°C.I am sure that it will do the same thing as other high-quality Operational Amplifiers, which are capable of a huge amount of amplifying.Depending on the supply voltage, the device is rated for a maximum voltage of 3.5V.Powered by at least 2.85V.In this case, 3V can be used to supply the device.Voltage gain of 20.6dB is excellent on this amplifier.It is specified that this amplifier has a 230Ohm resistance.Amplification can be provided by 1 basic elements.
LTC6401IUD-20#PBF Features
LTC6401IUD-20#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6401IUD-20#PBF Special Purpose Amplifiers applications.
- Weak signal detection
- Automation control systems
- Industrial control system
- Video conversion and routing
- Vehicle electronics
- Test and measurement instruments
- High/low-pass filter circuit
- Television
- Portable electronic products powered by batteries
- Blood pressure sensors
