Parameters |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Package / Case |
QFN EP |
Number of Pins |
16 |
Resistance |
230Ohm |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Operating Supply Voltage |
3V |
Number of Elements |
1 |
Number of Channels |
1 |
Max Supply Voltage |
3.5V |
Min Supply Voltage |
2.85V |
Slew Rate |
4500 V/μs |
Common Mode Rejection Ratio |
45 dB |
Input Offset Voltage (Vos) |
2mV |
Voltage Gain |
20.6dB |
Power Supply Rejection Ratio (PSRR) |
55dB |
Nominal Gain Bandwidth Product |
1.3 GHz |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
LTC6401IUD-20#TRPBF Overview
It is packaged in an QFN EP-case that protects the operational amplifiers from damage. It has 16 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. There should be no change in the voltage gain at 20.6dB. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. It is recommended that op amp be used at temperatures below 85°C. It is possible to count 1 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 3V voltage. It is important to keep in mind that the power supply voltage of this electric component is below 3.5V, which is suitable. Over 2.85V is a recommended supply voltage for buffer ampsInstrumentation amplifier resistance should remain within the range of 230Ohm.
LTC6401IUD-20#TRPBF Features
20.6dB voltage gain
Resistance of 230Ohm
LTC6401IUD-20#TRPBF Applications
There are a lot of Analog Devices, Inc. LTC6401IUD-20#TRPBF Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Division circuits
- Logarithmic operation circuits
- Automation control systems
- Video computer boards
- Micro signal measurement
- Laptop
- Video conversion and routing
- E-book readers
- Video data acquisition