LTC6405IMS8E#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | MSOP |
| Number of Pins | 8 |
| Resistance | 230kOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Slew Rate | 690 V/μs |
| Current - Input Bias | 14μA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 2.7 GHz |
| Gain Bandwidth Product | 2.7 GHz |
| Voltage Gain | 90dB |
| Nominal Gain Bandwidth Product | 2.7 GHz |
| Number of Amplifiers | 1 |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LTC6405IMS8E#PBF Overview
The linear amplifier is packaged in a MSOP case. An 8-pin op amp ic is included in the package. Op amp rates 6mV as input offset voltage. 90dB should be the voltage gain. Buffer op amp is equipped with 1 channels on the device. Using this buffer op amp requires a temperature of at least -40°C. Instrumentation amplifier should only be used at temperatures up to 85°C. A voltage rating of 1 is indicated for the op amp's operating supply voltage. The operating supply voltage of instrumentation amplifier is rated 5V voltage. I would like to point out that this electrical component is capable of working from a voltage below 5.5V as far as the power supply is concerned. A voltage of 4.5V or higher is recommended for the linear amplifier's supply voltage. Instrumentation amplifier resistance should remain within the range of 230kOhm. There are 1 amplifiers on the op amp.
LTC6405IMS8E#PBF Features
90dB voltage gain
Resistance of 230kOhm
LTC6405IMS8E#PBF Applications
There are a lot of Analog Devices, Inc. LTC6405IMS8E#PBF Instrumentational OP Amps applications.
- Polarized electrodes
- High speed sample
- Test equipment
- Inverse/same-phase proportional circuit
- Fast A/D and D/A converters
- Displayers for aircraft and air transportation control systems
- Medical imaging
- Television
- single/dual op amp sum and difference circuits
- PDA
