LTC6421CUDC-20#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | ADC Driver |
| Resistance | 230Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Applications | Data Acquisition |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6421 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Power Supplies | 3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.5V |
| Min Supply Voltage | 2.85V |
| Supply Current-Max | 50mA |
| Slew Rate | 4500 V/μs |
| Common Mode Rejection Ratio | 45 dB |
| Input Offset Voltage (Vos) | 400μV |
| Bandwidth | 1.3 GHz |
| Power Supply Rejection Ratio (PSRR) | 55dB |
| Gain | 20 dB |
| Nominal Gain Bandwidth Product | 1.3 GHz |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC6421CUDC-20#PBF Overview
The package that this product comes in is called a Tube package.I would absolutely recommend the ADC Driver to anyone who wants a ADC Driver at a good price.The 20-WFQFN Exposed Pad package was dispatched with this item.As part of the mounting process, the part needs to be mounted in the Surface Mount direction in order to be positioned in the right place.As a result, it's mainly used in Data Acquisition programs.Part number LTC6421 corresponds to the base part number of the device.This function accesses high performance for amplification.20 terminals are present in total, each with its own set of functions that can be carried out.In order to achieve the maximum relow for the part, the iron temperature should be controlled under 260 during the peak relow procedure.There are total of 20 pins in this part.In order for this amplifier to operate properly, I would recommend a supply voltage of 3V.The amplifier has 20-pins for custom applications.As low as 0°C is the lowest temperature at which a device can perform as well as possible.Interestingly, this part can run at temperatures up to 70°C.As with other high-quality Operational Amplifiers, it has a marvellous amplification power.There is a maximum voltage of 3.5V for which it is rated.Supplied with at least 2.85V power.It is possible to supply this device using 3V.3V power supplies are required for this part.In this amplifier, 230Ohm resistance is specified.Amplification is performed by using 2 basic elements.A supply current cannot exceed 50mA if it is being monitored.
LTC6421CUDC-20#PBF Features
LTC6421CUDC-20#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6421CUDC-20#PBF Special Purpose Amplifiers applications.
- Comparator
- Home and commercial audio systems
- Television broadcasting equipment
- Video data acquisition
- Inverse/same-phase proportional circuit
- Video conversion and routing
- Active probe
- Switching amplifier
- Industrial control system
- Digital cameras
