LTC690IN8#PBF
| Parameters | |
|---|---|
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 35ms Minimum |
| Supply Current-Max (Isup) | 2.5mA |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Height Seated (Max) | 3.937mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC690I |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 500mW |
LTC690IN8#PBF Overview
As you can see, this power management is mounted through 8 terminals. There is a Tube-packaging method applied to IC management. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for 8-DIP (0.300, 7.62mm) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of NOT SPECIFIED for the package during reflow. In a 5V supply voltage, the power management conducts. A supply voltage of 1 is used to conduct the PMIC chip. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 8 pins on the board. Power managment ic pin count is 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 4.75V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Mounting type Through Hole is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. To find similar IC managements from the manufacturer, you can always search by LTC690I. In order to operate this power management, it requires 5V volts of power.
LTC690IN8#PBF Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.75V
LTC690IN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC690IN8#PBF Voltage Supervisors applications.
- Military communications
- Embedded computing
- Transformer load monitoring equipment
- Detection of phase imbalance
- Medical-specific insulation monitor
- Analog circuit
- Multi-voltage system
- Household appliances
- emergency room
- Personal computers
