LTC6910-1CTS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6910 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 3.5mA |
| Supply Current-Max | 4.9mA |
| Slew Rate | 16V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 55 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10.5V ±2.7V~5.25V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 40.1dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.5mV |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Nominal Gain Bandwidth Product | 11MHz |
| Voltage Gain-Nom | 2 |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6910-1CTS8#TRPBF Overview
Op amp is packaged in SOT-23-8 Thin, TSOT-23-8 case. This is a Programmable Gain type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Instrumentation Amplifier device. Linear amplifier includes 8 pins. The input offset voltage is 3mV. This electrical part should be mounted using type Surface Mount. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureIn order for this instrumentation amplifier to operate, the supply current needs to be between 3.5mA and 10 . The voltage gain should stay at 40.1dB. A instrumentation amplifier like this has 1 circuits. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. There are a total of 1 elements in this linear amplifier. It is important to keep the resistance within the 100MOhm range of the op amps.
LTC6910-1CTS8#TRPBF Features
8 Pins
supply voltage of 5V
40.1dB voltage gain
Output Type: Rail-to-Rail
Resistance of 100MOhm
LTC6910-1CTS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6910-1CTS8#TRPBF Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Broadcasting
- High-frequency data acquisition systems
- Medical instruments
- Differentiator circuits
- RF cable systems
- Industrial applications including automation
- Radar
- Band-stop filter
- Industrial control system
