LTC6910-1ITS8#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6910 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 3.5mA |
| Slew Rate | 16V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 55 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10.5V ±2.7V~5.25V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 40.1dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.5mV |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Nominal Gain Bandwidth Product | 11MHz |
| Voltage Gain-Nom | 2 |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6910-1ITS8#TRMPBF Overview
In the package, you will find a SOT-23-8 Thin, TSOT-23-8-case to contain the op amp ic. A Programmable Gain-type buffer amplifier is shown here. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 5V. A type of Instrumentation Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are available on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 3mV. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 3.5mA and 10 . There should be no change in the voltage gain at 40.1dB. In total, there are 1 circuits on this buffer amplifier. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. There are 1 elements in total in this linear amplifier. Op amp resistance should stay within the range of 100MOhm.
LTC6910-1ITS8#TRMPBF Features
8 Pins
supply voltage of 5V
40.1dB voltage gain
Output Type: Rail-to-Rail
Resistance of 100MOhm
LTC6910-1ITS8#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6910-1ITS8#TRMPBF Instrumentational OP Amps applications.
- ECG equipment
- Gaming industry
- RF cable systems
- Displayers for aircraft and air transportation control systems
- Exponential operation circuits
- Radiation thermometry transducers
- earphone
- Strain gauges
- Band-stop filter
- Power transmission
