LTC6910-2CTS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6910 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 3.5mA |
| Slew Rate | 16V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 55 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10.5V ±2.7V~5.25V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 13MHz |
| Unity Gain BW-Nom | 13000 kHz |
| Voltage Gain | 36dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.5mV |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Nominal Gain Bandwidth Product | 11MHz |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6910-2CTS8#TRPBF Overview
There is a SOT-23-8 Thin, TSOT-23-8 case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. An 3.5mA volt supply current is needed for this linear amplifier to operate. 36dB should remain the voltage gain. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The linear amplifier consists of 1 different elements in total. It is recommended to keep the buffer amps resistance within the range of 100MOhm.
LTC6910-2CTS8#TRPBF Features
8 Pins
supply voltage of 5V
36dB voltage gain
Output Type: Rail-to-Rail
Resistance of 100MOhm
LTC6910-2CTS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6910-2CTS8#TRPBF Instrumentational OP Amps applications.
- Micro signal measurement
- Band-pass filter
- Information processing
- High speed sample
- Industrial control system
- Cinema or auditorium audio system
- Hand-held batteries
- Automotive sensors
- Subtraction operation circuits
- High input resistance broadband
