LTC6910-2ITS8#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6910 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 3.5mA |
| Slew Rate | 16V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 55 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10.5V ±2.7V~5.25V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 13MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 36dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.5mV |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Nominal Gain Bandwidth Product | 11MHz |
| Voltage Gain-Nom | 2 |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6910-2ITS8#TRMPBF Overview
The linear amplifier is packaged in a SOT-23-8 Thin, TSOT-23-8 case. An op amp ic of the Programmable Gain type. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. In total, there are 8 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Instrumentation Amplifier devices. The op amp ic has an array of 8 pins on it. Op amp rates 3mV as input offset voltage. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. An 3.5mA volt supply current is needed for this linear amplifier to operate. You should keep the voltage gain at 36dB for the time being. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. There is a rating of 1 for the operating supply voltage of the buffer op amp. During testing, the instrumentation amplifier resistance should remain within a range of 100MOhm.
LTC6910-2ITS8#TRMPBF Features
8 Pins
supply voltage of 5V
36dB voltage gain
Output Type: Rail-to-Rail
Resistance of 100MOhm
LTC6910-2ITS8#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6910-2ITS8#TRMPBF Instrumentational OP Amps applications.
- High input resistance broadband
- Multimedia playback equipment
- Gaming industry
- Exponential operation circuits
- pH (acidity)
- Broadcasting
- Micro signal measurement
- Portable docking station
- Scintillation detectors
- Medical instruments
