LTC6910-2ITS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6910 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 3.5mA |
| Slew Rate | 16V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 55 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10.5V ±2.7V~5.25V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 13MHz |
| Unity Gain BW-Nom | 13000 kHz |
| Voltage Gain | 36dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.5mV |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Nominal Gain Bandwidth Product | 11MHz |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6910-2ITS8#TRPBF Overview
The linear amplifier is packaged in a SOT-23-8 Thin, TSOT-23-8 case which makes it easy for the consumer to handle. Buffer amps of this type are called Programmable Gain-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. A total of 8 terminations have been reported in the past few weeks. In this case, there are 8 pins on the board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 3mV. The mounting type that is recommended for this electrical part is Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureThe buffer amplifier is capable of operating from a supply current of 3.5mA . You should keep the voltage gain at 36dB for the time being. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. As a whole, there are 1 elements that make up this buffer amplifier. During testing, the buffer amplifier resistance should remain within a range of 100MOhm.
LTC6910-2ITS8#TRPBF Features
8 Pins
supply voltage of 5V
36dB voltage gain
Output Type: Rail-to-Rail
Resistance of 100MOhm
LTC6910-2ITS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6910-2ITS8#TRPBF Instrumentational OP Amps applications.
- Instrumentation
- Signal operation
- Vehicle electronics
- Strain gauges
- Video computer boards
- Ultrasound transducers
- Commercial audio systems
- High speed sample
- Voltage regulation circuit
- Navigation
