LTC6910-3HTS8#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6910 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 3.5mA |
| Slew Rate | 16V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10.5V ±2.7V~5.25V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 17dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.5mV |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Nominal Gain Bandwidth Product | 11MHz |
| Voltage Gain-Nom | 2 |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6910-3HTS8#TRMPBF Overview
In the package, you will find a SOT-23-8 Thin, TSOT-23-8-case to contain the op amp ic. A Programmable Gain-type buffer amplifier is shown here. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Instrumentation Amplifier device. An 8-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 3.5mA . You should keep the voltage gain at 17dB for the time being. This op amp ic has 1 circuits. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The total number of elements in this buffer amplifier is 1. It is important that the op amp resistance stays within the range of 100MOhm.
LTC6910-3HTS8#TRMPBF Features
8 Pins
supply voltage of 5V
17dB voltage gain
Output Type: Rail-to-Rail
Resistance of 100MOhm
LTC6910-3HTS8#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6910-3HTS8#TRMPBF Instrumentational OP Amps applications.
- Integrator circuits
- Semiconductor detectors
- Subtraction operation circuits
- Thermocouples
- Tablets
- Non-polarized electrodes
- Gaming industry
- single/dual op amp sum and difference circuits
- pH (acidity)
- Industrial control system
