LTC6910-3HTS8#TRPBF
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 3.5mA |
| Slew Rate | 16V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10.5V ±2.7V~5.25V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 17dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.5mV |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Nominal Gain Bandwidth Product | 11MHz |
| Voltage Gain-Nom | 2 |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6910 |
| Pin Count | 8 |
LTC6910-3HTS8#TRPBF Overview
Packaged in a SOT-23-8 Thin, TSOT-23-8 case, the buffer op amp is ready to use. An op amp of this type is a Programmable Gain-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 5V. I would like to specify that this buffer amplifier belongs to the Instrumentation Amplifier-type of devices. 8 pins are located on the operational amplifiers. The input offset voltage is 3mV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, op amp ranges -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 3.5mA . It is a member of the 17dB's 17dB family. There are 1 circuits on this op amp. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. It is important that the linear amplifier resistance stays within the range of 100MOhm.
LTC6910-3HTS8#TRPBF Features
8 Pins
supply voltage of 5V
17dB voltage gain
Output Type: Rail-to-Rail
Resistance of 100MOhm
LTC6910-3HTS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6910-3HTS8#TRPBF Instrumentational OP Amps applications.
- Commercial audio systems
- earphone
- Radar
- Signal operation
- Cinema or auditorium audio system
- Integrator circuits
- Division circuits
- Fission chambers
- High/low-pass filter circuit
- PDA
