LTC6910-3ITS8#TRMPBF
| Parameters | |
|---|---|
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6910 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 3.5mA |
| Slew Rate | 16V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 55 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10.5V ±2.7V~5.25V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 17dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.5mV |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Nominal Gain Bandwidth Product | 11MHz |
| Voltage Gain-Nom | 2 |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
LTC6910-3ITS8#TRMPBF Overview
There is a SOT-23-8 Thin, TSOT-23-8 case in which the instrumentation amplifier is packaged. A Programmable Gain-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Instrumentation Amplifier. 8 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. Surface Mount is the recommended mounting type for this linear amplifier. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . You can run this op amp ic on 3.5mA . It is recommended to keep the voltage gain at 17dB at all times. This op amp ic has 1 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The op amp is rated for an operating supply voltage of 1. In order for the buffer amplifier resistance to remain within the 100MOhm range, the device should be tested.
LTC6910-3ITS8#TRMPBF Features
8 Pins
supply voltage of 5V
17dB voltage gain
Output Type: Rail-to-Rail
Resistance of 100MOhm
LTC6910-3ITS8#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6910-3ITS8#TRMPBF Instrumentational OP Amps applications.
- earphone
- High-frequency data acquisition systems
- Addition operation circuits
- Oscilloscopes
- Instrumentation
- Radiation thermometry transducers
- RF cable systems
- Weighing systems
- Communication device
- Semiconductor detectors
