LTC6911IMS-1#PBF
| Parameters | |
|---|---|
| Slew Rate | 16V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 55 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10.5V ±2.7V~5.25V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 11MHz |
| Supply Current-Max (Isup) | 9.3mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 40.1dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Nominal Gain Bandwidth Product | 11MHz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 100MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6911 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Supply Voltage-Min (Vsup) | 1.35V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 3.1mA |
LTC6911IMS-1#PBF Overview
The linear amplifier is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. Op amps are Programmable Gain types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 10 terminations in the next few months. Linear amplifier has a total of 10 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Other Analog ICs-type of devices. A total of 10 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 3.1mA and 10 . You should keep the voltage gain at 40.1dB for the time being. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. It is important to keep the resistance within the 100MOhm range of the linear amplifier. In this linear amplifier, there is also an analog IC called a ANALOG CIRCUIT.
LTC6911IMS-1#PBF Features
10 Pins
supply voltage of 5V
40.1dB voltage gain
Output Type: Rail-to-Rail
Resistance of 100MOhm
LTC6911IMS-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6911IMS-1#PBF Instrumentational OP Amps applications.
- Video amplifiers
- Semiconductor detectors
- Band-stop filter
- Oscilloscopes
- Multimedia playback equipment
- Power control
- Portable docking station
- Test equipment
- Proportional operation circuits
- Proportional counter tubes
