LTC6911IMS-2#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 100MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6911 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Supply Voltage-Min (Vsup) | 1.35V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 3.1mA |
| Slew Rate | 16V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 55 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10.5V ±2.7V~5.25V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 11MHz |
| Supply Current-Max (Isup) | 9.3mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 36.3dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Nominal Gain Bandwidth Product | 11MHz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6911IMS-2#PBF Overview
Packaging for the buffer amplifier is in the form of a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case. A Programmable Gain-type buffer amplifier is shown here. A Tube case is used for delivering the op amp. In recent months, the number of terminations has approached 10. The total number of pins on linear amplifier is 10. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Other Analog ICs device, to be precise. An 10-pin op amp ic is included in the package. Op amp rates 2mV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 3.1mA . 36.3dB should be the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. Instrumentation amplifier resistance should remain within the range of 100MOhm. This linear amplifier also utiliANALOG CIRCUITes an analog IC known as a ANALOG CIRCUIT.
LTC6911IMS-2#PBF Features
10 Pins
supply voltage of 5V
36.3dB voltage gain
Output Type: Rail-to-Rail
Resistance of 100MOhm
LTC6911IMS-2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6911IMS-2#PBF Instrumentational OP Amps applications.
- Signal operation
- Digital cameras
- Medical imaging
- Communication device
- Broadcasting
- Hand-held batteries
- High input resistance broadband
- Fast A/D and D/A converters
- Wireless base stations
- Comparator
