LTC6912CGN-1#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Resistance | 10MOhm |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 10.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 2.25mA |
| Slew Rate | 16 V/μs |
| Common Mode Rejection Ratio | 55 dB |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 50MHz |
| Gain Bandwidth Product | 33MHz |
| Voltage Gain | 39.85dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Max Dual Supply Voltage | 5.25V |
| Min Dual Supply Voltage | 1.35V |
| Nominal Gain Bandwidth Product | 30MHz |
| Number of Amplifiers | 2 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LTC6912CGN-1#PBF Overview
There is a SSOP case in which the instrumentation amplifier is packaged. An 16-pin op amp ic is included in the package. Op amp rates 2mV as input offset voltage. It is possible to operate this buffer amplifier from a supply current of 2.25mA . There should be no change in the voltage gain at 39.85dB. The buffer amp consists of 2 circuits in total. Instrumentation amplifier has 2 channels on it. It should not lower than 0°C to operate buffer amplifier. At temperatures greater than 70°C, Instrumentation amplifier should not be used. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. It is important to keep in mind that the power supply voltage of this electric component is below 10.5V, which is suitable. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.7V when using it. Conduct linear amplifier under the dual suuply voltage of 5.25V. 10MOhm should be the range of resistance for the linear amplifier. There are 2 amplifiers on the op amp.
LTC6912CGN-1#PBF Features
39.85dB voltage gain
Resistance of 10MOhm
LTC6912CGN-1#PBF Applications
There are a lot of Analog Devices, Inc. LTC6912CGN-1#PBF Instrumentational OP Amps applications.
- pH (acidity)
- Logarithmic operation circuits
- Band-stop filter
- Ultrasound transducers
- Signal amplification
- Differentiator circuits
- Precision measurement
- Industrial control system
- Micro signal measurement
- RF cable systems
