LTC6912IGN-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6912 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Supply Voltage-Min (Vsup) | 1.35V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 2.25mA |
| Slew Rate | 26V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 55 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10.5V ±2.7V~5.25V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 33MHz |
| Supply Current-Max (Isup) | 3.5mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 39.85dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Voltage - Input Offset | 125μV |
| Nominal Gain Bandwidth Product | 30MHz |
| Height Seated (Max) | 1.75mm |
| Length | 4.89mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6912IGN-1#PBF Overview
Packaging for the buffer amplifier is in the form of a 16-SSOP (0.154, 3.90mm Width) case. Programmable Gain-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tube case. During the past two weeks, there have been close to 16 terminations. Linear amplifier has a total of 16 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. I would like to specify that this buffer amplifier belongs to the Other Analog ICs-type of devices. An 16-pin op amp ic is included in the package. There is an input offset voltage of 2mV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing an 2.25mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. A total of 2 elements are present in this linear amplifier. The op amp resistance should stay within the range of 10MOhm. The buffer op amp also uses a ANALOG CIRCUIT analog IC.
LTC6912IGN-1#PBF Features
16 Pins
supply voltage of 5V
39.85dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10MOhm
LTC6912IGN-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6912IGN-1#PBF Instrumentational OP Amps applications.
- Hand-held batteries
- Weak signal detection
- Wireless base stations
- Communication device
- Logarithmic operation circuits
- ECG equipment
- Precision measurement
- Active probe
- E-book readers
- Subtraction operation circuits
