LTC6912IGN-1#TRPBF

2 Channels 35mA per Channel 55 dB Instrumentational OP Amps SSOP

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LTC6912IGN-1#TRPBF
Package: SSOP
Datasheet: PDF
Stock: 450
Description: 2 Channels 35mA per Channel 55 dB Instrumentational OP Amps SSOP(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Package / Case	SSOP
Number of Pins	16
Resistance	10MOhm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Number of Elements	2
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	10.5V
Min Supply Voltage	2.7V
Operating Supply Current	2.25mA
Slew Rate	16 V/μs
Common Mode Rejection Ratio	55 dB
Output Current per Channel	35mA
Input Offset Voltage (Vos)	2mV
Gain Bandwidth Product	33MHz
Voltage Gain	39.85dB
Power Supply Rejection Ratio (PSRR)	60dB
Max Dual Supply Voltage	5.25V
Min Dual Supply Voltage	1.35V
Nominal Gain Bandwidth Product	30MHz
RoHS Status	RoHS Compliant
Lead Free	Lead Free

LTC6912IGN-1#TRPBF Overview

The linear amplifier is packaged in a SSOP case. The op amp ic has an array of 16 pins on it. In terms of input offset voltage, operational amplifier rates 2mV. As long as the supply current of the chip does not exceed 2.25mA, this op amp ic can operate. It is a member of the 39.85dB's 39.85dB family. This op amp ic has 2 circuits. 2 channels are available on the instrumentation amplifier. This instrumentation amplifier cannot operate below -40°C degrees Celsius. It is recommended that op amp be used at temperatures below 85°C. For the operating supply voltage of the op amp ic, there is a rating of 2. This electric component can work from a voltage of under 10.5V as far as supply voltage is concerned. To keep the buffer amps' supply voltage higher than 2.7V. In order for this electronic part to be conducted successfully, you should use a dual supply voltage of 5.25V. It is recommended to keep the instrumentation amplifier resistance within the range of 10MOhm.