LTC6915CDE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6915 |
| Pin Count | 12 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 2.7/+-5V |
| Operating Supply Current | 1.73mA |
| Slew Rate | 0.2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±1.35V~5.5V |
| Input Offset Voltage (Vos) | 10μV |
| Gain Bandwidth Product | 200kHz |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Voltage - Input Offset | 5μV |
| -3db Bandwidth | 0.2MHz |
| Input Offset Current-Max (IIO) | 0.003μA |
| Height Seated (Max) | 0.85mm |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6915CDE#PBF Overview
A 12-WFDFN Exposed Pad case is used to package the op amp. This is a Instrumentation type op amp. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be 12 terminations in the next few months. Buffer amplifier has a total of 12 pins. Please take in mind that op amp should be run at 3V. An 12-pin op amp ic is included in the package. Op amp rates 10μV as input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . It is possible to operate this buffer amplifier from a supply current of 1.73mA . On the output type, there are Rail-to-Rail different types of op amps. This linear amplifier has a total of 1 elements.
LTC6915CDE#PBF Features
12 Pins
supply voltage of 3V
Output Type: Rail-to-Rail
LTC6915CDE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6915CDE#PBF Instrumentational OP Amps applications.
- Test equipment
- Precision measurement
- Fission chambers
- Weighing systems
- Video computer boards
- Radar
- Cinema or auditorium audio system
- Medical imaging
- Automotive sensors
- High gain DC amplifier
