LTC691CN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | LTC691 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 600μA |
| Power Dissipation | 500mW |
| Max Supply Current | 1.5mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Height | 3.3mm |
| Length | 19.56mm |
| Width | 6.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC691CN#PBF Overview
It is mounted through 16 terminals on the power management. In terms of packaging, power management follows the Tube model. The purpose of this IC management is to provide you with a reference of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find 16-DIP (0.300, 7.62mm) functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The supervisor is always powered by a 5V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 16. The pins of the power management system count 16. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 4.75V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type for IC management is Through Hole. We recommend setting the supervisors to 0°C~70°C TA degrees. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. To find similar IC managements from the manufacturer, you can always search by LTC691. In order to operate this power management, it requires 5V volts of power. At the most, voltage supervisor can work with a supply temperature of 1.5mA.
LTC691CN#PBF Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.75V
LTC691CN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC691CN#PBF Voltage Supervisors applications.
- Power distribution systems of infant care room
- Electric heating appliances
- Power distribution systems of ICU
- Urban rail transit weak current power monitoring
- Medical-specific isolation transformer
- Detection of phase sequence
- Household appliances
- Medical-specific insulation monitor
- Battery cars
- Microprocessor system
