LTC691CSW#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC691 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 500mW |
| Max Supply Current | 1.5mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Height | 2.34mm |
| Length | 10.49mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC691CSW#PBF Overview
It is mounted through 16 terminals on the power management. It is packaged with Tube. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes 16-SOIC (0.295, 7.50mm Width) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 16. The pins of the power management system count 16. IC management can only work with a supply voltage of 4.75V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to LTC691, which is the base power ics number. There is a requirement for 5V power to power this power management. The maximum supply temperature voltage supervisor can handle is 1.5mA. In general, this IC power runs at a frequency of 250MHz, which is sufficient for most applications as far as this IC power is concerned.
LTC691CSW#PBF Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.75V
LTC691CSW#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC691CSW#PBF Voltage Supervisors applications.
- Battery-powered equipment
- Utility meter
- Power distribution systems of CCU
- Electrical fire monitoring system
- Network equipment
- Low voltage/high power - AI, GPU
- Medical-specific isolation transformer
- Radar
- Unattended substation automation
- Leakage current detection
