LTC695CN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 250kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC695 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 500mW |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 2.5mA |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Height | 3.302mm |
| Length | 19.56mm |
| Width | 6.477mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC695CN#PBF Overview
There are 16 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tube. For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes 16-DIP (0.300, 7.62mm) functions for your convenience. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of NOT SPECIFIED is specified for the package. The supervisor is always powered by a 5V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 16 pins on the board. 16 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 4.75V for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Through Hole mounting type is recommended. We recommend setting the supervisors to 0°C~70°C TA degrees. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. If you want to search for similar IC managements of this manufacturer, you can always refer to LTC695, which is the base power ics number. The voltage supervisor requires a power source of 5V volts in order to work correctly. Generally, this IC management works at a frequency of 250kHz, which is sufficient for most applications.
LTC695CN#PBF Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.75V
LTC695CN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC695CN#PBF Voltage Supervisors applications.
- DSP
- Power distribution systems of infant care room
- Set top box
- Sensitive sensors
- Analog circuit
- Telecommunications equipment
- Data storage applications
- Utility meter
- Battery cars
- Leakage current detection
