LTC695CSW#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC695 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 500mW |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 2.5mA |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Height | 2.337mm |
| Length | 10.49mm |
| Width | 7.595mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC695CSW#PBF Overview
This power management consists of 16 mounting terminals on which it can be mounted. Packaging is in the form of a Tube. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. To assist you, this PMIC includes 16-SOIC (0.295, 7.50mm Width) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. When a supply voltage of 5V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 16. 16 pins make up the power management. A voltage (Vsup) that doesn't fall below 4.75V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: 0°C~70°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. To find similar IC managements from the manufacturer, you can always search by LTC695. A power supply of 5V watts is required for the operation of this power management.
LTC695CSW#PBF Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.75V
LTC695CSW#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC695CSW#PBF Voltage Supervisors applications.
- Detection of phase loss
- Data storage applications
- Radio
- Battery-powered equipment
- Unattended substation automation
- Smartphones
- Magnetic resonance imaging
- Efficient information transmission
- Solar power charger
- Set top box
