LTC699CN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC699 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 500mW |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 2.5mA |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Threshold Voltage | +4.65V |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC699CN8#PBF Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaged in the form of a Tube, power management is easy to use. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of NOT SPECIFIED is specified for the package. IC management conducts in a 5V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 8 pins. This power management system has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 3V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Through Hole. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. You can always use LTC699, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 3.3/5V volts to function properly.
LTC699CN8#PBF Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
LTC699CN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC699CN8#PBF Voltage Supervisors applications.
- Linux and server computing
- Urban rail transit weak current power monitoring
- WiFi router
- Important electronics for automotive protection
- Military communications
- Unattended substation automation
- Medical-specific insulation monitor
- Analog circuit
- Smartphones
- DSP
