LTC699CS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC699 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 500mW |
| Max Supply Current | 1.5mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Threshold Voltage | +4.65V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.988mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC699CS8#PBF Overview
Power management is mounted through 8 terminals. A Tube package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. Manage ics operate at 5V supply voltages. IC management is possible to find a succession of 1 voltages that have been checked. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 8 pins in it. There are 8 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 3V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: 0°C~70°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to LTC699, which is the base power ics number. The voltage supervisor requires a power source of 3.3/5V volts in order to work correctly. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.5mA.
LTC699CS8#PBF Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
LTC699CS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC699CS8#PBF Voltage Supervisors applications.
- emergency room
- DC stabilized power supply module
- Automotive power systems
- Battery-powered equipment
- Magnetic resonance imaging
- Microcontroller system
- Leakage current detection
- Telecommunications equipment
- Digitally controlled LDO regulators circuit
- Battery cars
