LTM8062AIV#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 77-BLGA |
| Surface Mount | YES |
| Number of Pins | 77 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | µModule® |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 77 |
| ECCN Code | EAR99 |
| Terminal Finish | Gold (Au) |
| Terminal Position | BOTTOM |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTM8062 |
| Pin Count | 77 |
| Qualification Status | Not Qualified |
| Output Voltage | 14.4V |
| Max Supply Voltage | 32V |
| Min Supply Voltage | 4.95V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Operating Supply Current | 85μA |
| Max Output Voltage | 18.8V |
| Min Input Voltage | 4.95V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 32V |
| Nominal Input Voltage | 32V |
| Min Output Voltage | 3.3V |
| Switcher Configuration | BUCK |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 |
| Programmable Features | Timer |
| Current - Charging | Constant |
| Charge Current - Max | 2.1A |
| Height Seated (Max) | 4.42mm |
| Width | 9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTM8062AIV#PBF Overview
If you are looking for it in the Tray package, then you have found it.We've included it in the 77-BLGA package so that it's easier to use.Mounting type is Surface Mount.If the temperature is set to -40°C~125°C TA, reliable performance will be assured.It functions by using an analog IC called BATTERY CHARGE CONTROLLER.The device requires Constant of current to charge.Based on the base part number LTM8062, it is possible to find related parts for this device.It contains 77 terminations.Total number of pins: 77.In addition to Timer, a variety of programmable features are available.As far as the charging current is concerned, it is 2.1A at full charge.During the installation process, this product requires the connection of 77 pins.Applied input voltage of 32V does not damage the device.In the case of 14.4V output voltage, there is a possibility of optimal efficiency.The device can operate at as low a supply voltage as possible, such as 4.95V.μModule? series electrical components make up this component.Input voltage is limited to 4.95V volts at the lowest.Its supply carries 85μA current.Input voltage is limited to 32V volts.As a maximum output supply voltage for this operation, the voltage must be set to 18.8V.
LTM8062AIV#PBF Features
77-BLGA package
LTM8062AIV#PBF Applications
There are a lot of Linear Technology/Analog Devices LTM8062AIV#PBF Battery Chargers ICs applications.
- Ruggedized notebooks/tablet computers
- Forklift
- TV sticks
- Remote sensor
- Smart speakers
- Model aircraft
- Electronic dictionary
- Marine buoy lights
- Instruments and meters
- Rental fleets
