banner_page

LTP5901IPC-IPMA1D0#PBF

LTP5901IPC-IPMA1D0#PBF datasheet pdf and RF Transceiver Modules product details from Linear Technology/Analog Devices stock available at Noco


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LTP5901IPC-IPMA1D0#PBF
  • Package: Module
  • Datasheet: PDF
  • Stock: 114
  • Description: LTP5901IPC-IPMA1D0#PBF datasheet pdf and RF Transceiver Modules product details from Linear Technology/Analog Devices stock available at Noco(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case Module
Number of Pins 66
Operating Temperature -40°C~85°C
Packaging Tray
Published 2015
Series SmartMesh® IP
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Voltage - Supply 2.1V~3.76V
Frequency 2.4GHz
Base Part Number LTP5901
Interface SPI, UART
Max Supply Voltage 3.76V
Min Supply Voltage 2.1V
Memory Size 512kB Flash 72kB SRAM
Nominal Supply Current 30mA
Data Rate 250kbps
Protocol Smartmesh IP™, 6LoWPAN
Max Frequency 2.4835GHz
Power - Output 8dBm
RF Family/Standard 802.15.4
Antenna Type Integrated, Chip
Sensitivity -95dBm
Serial Interfaces SPI, UART
Current - Receiving 4.5mA
Current - Transmitting 5.4mA~9.7mA
Modulation DSSS
Sensitivity (dBm) -95 dBm
REACH SVHC No SVHC
RoHS Status RoHS Compliant

LTP5901IPC-IPMA1D0#PBF Overview


In order to mount the RF Transceiver, Surface Mount is used.A Transceiver RF's maximum supply voltage of 3.76V is acceptable.optimized performance is achieved by utilizing the Tray package in this RF Transceiver module.In order for it to operate properly, Transceiver's operating temperature should be at -40°C~85°C.This high power Transceiver belongs to the LTP5901 family.In order to operate high power RF Transceiver, 66 pins are required.A type of RF Transceiver Module, belonging to the SmartMesh? IP family, is what we are describing here.There is 2.1V~3.76V voltage limit on the RF Transceiver.RF Transceiver Modules operate with a frequency of 2.4GHz Hz.There are many applications for this Transceiver , since it is Surface Mount mounted.

LTP5901IPC-IPMA1D0#PBF Features


Surface Mount
3.76V volts
Tray package
LTP5901
66 pins
2.1V~3.76V volts

LTP5901IPC-IPMA1D0#PBF Applications


There are a lot of Linear Technology/Analog Devices LTP5901IPC-IPMA1D0#PBF RF Transceiver Modules applications.

  • Health care
  • Health and Fitness
  • Fitness
  • Consumer Electronics
  • Chemical Sensors
  • Patient Asset Tracking
  • Security Systems
  • Location and Asset Tracking
  • Remote Control

Write a review

Note: HTML is not translated!
    Bad           Good