LV11961HA-AH
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-LSSOP (0.173, 4.40mm Width) + 2 Heat Tabs |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e6 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | DC Motors, General Purpose |
| Subcategory | Motion Control Electronics |
| Max Power Dissipation | 1.1W |
| Technology | Bi-CMOS |
| Voltage - Supply | 3.6V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 100kHz |
| Number of Outputs | 1 |
| Operating Supply Voltage | 12V |
| Supply Voltage-Min (Vsup) | 3.6V |
| Interface | Logic |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Operating Supply Current | 2mA |
| Output Configuration | Half Bridge (2) |
| Output Current | 1A |
| Output Current per Channel | 1A |
| Supply Current-Max (Isup) | 3mA |
| Collector Emitter Voltage (VCEO) | 18V |
| Max Collector Current | 1A |
| Voltage - Load | 3.6V~16V |
| Fault Protection | Over Temperature, Over Voltage, UVLO |
| Motor Type | Brushless DC (BLDC) |
| Load Type | Inductive |
| Height | 1.3mm |
| Length | 6.95mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LV11961HA-AH Overview
To package H bridge, use Tape & Reel (TR).In order to save costs, H bridge is included in the 14-LSSOP (0.173, 4.40mm Width) + 2 Heat Tabs package.The supply voltage of 3.6V~16V can improve reliabilbridge drivery.H bridge circuit is mounted in the way of Surface Mount.In order for -40°C~150°C TJ to function normally, motor driver H bridge needs to be kept at a certain temperature.H bridge motor driver can be used for a variety of purposes, including DC Motors, General Purpose.H gate is mounted on the PCB using Surface Mount.Full bridge also possesses Slew Rate Controlled as a specific characteristic.Transmission lines are terminated with 14 terminations with the H bridge that matches their characteristic impedance.A signal interface uses 14 pins as pronged contacts.H bridge circuit operates on a voltage of 12V.H bridge circuit contains an analog IC type BRUSHLESS DC MOTOR CONTROLLER.There is 1A current flowing through the output and power supply pins.There are 1 outputs on this Hbridge.This H bridge motor driver falls under the subcategory of Motion Control Electronics. It is similar to other parts within that category.For the highest level of efficiency, the operating supply voltage is kept at 12V.
LV11961HA-AH Features
Available in 14-LSSOP (0.173, 4.40mm Width) + 2 Heat Tabs Package / Case
Operating Temperature at the range of Surface Mount
Number of Receivers: 12V
LV11961HA-AH Applications
There are a lot of ON Semiconductor LV11961HA-AH Full Bridge Drivers, Half-Bridge Drivers applications.
- Quad DC motor
- Networking Microprocessor Voltage Regulators
- Industrial Automation
- Workstations
- High current, low profile DC-DC converters
- Telecom Microprocessor
- High-Performance Gaming Motherboards
- Voltage Regulators
- Optical disc drives
- PC peripherals
