LV8011V-TLM-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -20°C~75°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2006 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | DC Motors, General Purpose |
| Technology | DMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LV8011 |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Output Voltage | 6.5V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Logic |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 700μA |
| Output Configuration | Half Bridge (2) |
| Output Current | 1A |
| Voltage - Load | 2V~6.5V |
| Fault Protection | Over Temperature |
| Rds On (Typ) | 370m Ω |
| Motor Type | Brushed |
| Current - Peak Output | 5A |
| Load Type | Inductive |
| Height | 1.3mm |
| Length | 6.95mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LV8011V-TLM-E Overview
It is packaged with Cut Tape (CT).H bridge is included in the 20-LSSOP (0.173, 4.40mm Width) package as a cost-saving measure.With the 4.5V~5.5V supply voltage, improved reliabilbridge drivery can be achieved.In Surface Mount, H bridge circuit is mounted.When -20°C~75°C TA is operating at a certain temperature, motor driver H bridge can function normally.DC Motors, General Purpose is pretty useful in a variety of applications.PCB mounting is performed using Surface Mount.A transmission line can be terminated at a 20 termination with the H bridge whose characteristic impedance matches the transmission line.Signal interfaces include 20 pins that serve as pronged contacts.Based on its base H bridge ic number of LV8011, more closely related H bridge ics can be found.The H bridge is powered by a voltage supply of 5V.H bridge circuit contains an analog IC type BRUSH DC MOTOR CONTROLLER.The maximum amount of current which output reaches 5A.Through the output and power supply pins, a current of 1A is flowing.20 pins are work together to help this bridge driver play its specific functions.2 outputs are provided.In this case, the voltage released by the Hbridge is 6.5V.
LV8011V-TLM-E Features
Available in 20-LSSOP (0.173, 4.40mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : LV8011
Subcategory: 5A
LV8011V-TLM-E Applications
There are a lot of ON Semiconductor LV8011V-TLM-E Full Bridge Drivers, Half-Bridge Drivers applications.
- Voltage Regulators for DDR memory arrays
- High current, low profile DC-DC converters
- High-Current DC-DC Point-of-Load Converters
- Industrial Automation
- Optical disc drives
- Industrial Fans
- Bipolar stepper motor
- Notebook Computers
- V-Core
- High-Performance Gaming Motherboards
