LV8012T-MPB-E
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~75°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | DC Motors, General Purpose |
| Additional Feature | ALSO OPERATES IN 2 TO 7V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 7V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Interface | Logic |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 1μA |
| Output Configuration | Half Bridge (4) |
| Power Dissipation | 800mW |
| Output Current | 1.4A |
| Output Current per Channel | 1.4A |
| Supply Current-Max (Isup) | 1.2mA |
| Voltage - Load | 2V~7V |
| Fault Protection | Over Temperature |
| Rds On (Typ) | 750m Ω |
| Load Type | Inductive |
| Height Seated (Max) | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LV8012T-MPB-E Overview
In this package, Tube is used.H bridge is provided in the 24-TFSOP (0.173, 4.40mm Width) package for the sake of cost savings.Improved reliabilbridge drivery can be ensured based on the supply voltage of 2.7V~5.5V.In Surface Mount, H bridge circuit is mounted.-20°C~75°C TA is able to function normally at motor driver H bridges operating temperature.This tool is useful for a number of applications, including DC Motors, General Purpose.On the PCB H gate is mounted using Surface Mount.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 24 terminations are employed.24 pins is used as pronged contacts as H bridge ic of a signal interface.H bridge circuit operates on a voltage of 5V.IC type BRUSH DC MOTOR CONTROLLER is used as H bridge circuit's analog IC.The output and power supply pins are flowing wH-bridgeh current 1.4A.It is through 24 pins that this bridge driver is able to perform its specific functions.There are many similarities between this H bridge motor driver and other components in the subcategory of Motion Control Electronics.For the highest level of efficiency, the operating supply voltage is kept at 7V.An electrical load is supplied with power from 5V.As an additional option, ALSO OPERATES IN 2 TO 7V SUPPLY can be provided.
LV8012T-MPB-E Features
Available in 24-TFSOP (0.173, 4.40mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Number of Receivers: 7V
With ALSO OPERATES IN 2 TO 7V SUPPLY Drivers
LV8012T-MPB-E Applications
There are a lot of ON Semiconductor LV8012T-MPB-E Full Bridge Drivers, Half-Bridge Drivers applications.
- V-Core
- Bipolar stepper motor
- DVD players
- Home Appliances
- Notebook Computers
- Networking Microprocessor Voltage Regulators
- OA equipments
- Non-V-Core
- High-Performance Gaming Motherboards
- Optical disc drives
