LV8013T-A-TLM-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~75°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2008 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | DC Motors, General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LV8013 |
| Pin Count | 24 |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | Logic |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 700μA |
| Output Configuration | Half Bridge (2) |
| Output Current | 1.2A |
| Voltage - Load | 2V~15V |
| Fault Protection | Over Temperature |
| Rds On (Typ) | 300m Ω |
| Current - Peak Output | 2A 3.8A |
| Load Type | Inductive |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LV8013T-A-TLM-E Overview
Cut Tape (CT) is used for packaging.A cost-saving measure, H bridge is included in 24-TFSOP (0.173, 4.40mm Width).The supply voltage 2.7V~5.5V has the capabilbridge drivery of improving reliabilbridge drivery.H bridge circuit is mounted in the way of Surface Mount.Motor driver H bridge works normally at -20°C~75°C TA's operating temperature.Among H bridge motor drivers many applications are DC Motors, General Purpose.The board is mounted using Surface Mount.Transmission lines are terminated with H bridges whose characteristic impedance matches their characteristic impedance, known as 24 terminations.As H bridge ic of a signal interface, 24 pins are used as pronged contacts.Based on its base H bridge ic number of LV8013, further related H bridge ics can be identified.This H bridge operates with a voltage of 5V.BRUSH DC MOTOR CONTROLLER has been incorporated as H bridge circuit's analog IC type.This is the maximum current at which the output reaches 2A 3.8A.Through the output and power supply pins, a current of 1.2A is flowing.A number of 24 pins work together to provide this bridge driver with its specific functions.The Hbridge has 1 outputs.H bridge motor drivers in the subcategory Motion Control Electronics have a wide range of similarities.
LV8013T-A-TLM-E Features
Available in 24-TFSOP (0.173, 4.40mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : LV8013
Subcategory: 2A 3.8A
LV8013T-A-TLM-E Applications
There are a lot of ON Semiconductor LV8013T-A-TLM-E Full Bridge Drivers, Half-Bridge Drivers applications.
- Bipolar stepper motor
- Optical disc drives
- OA equipments
- Voltage Regulators
- Industrial Fans
- High-Performance Gaming Motherboards
- VTR
- High current, low profile DC-DC converters
- V-Core
- High-Current DC-DC Point-of-Load Converters
