LV8014T-TLM-E
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~75°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | DC Motors, General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LV8014 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Interface | Logic |
| Analog IC - Other Type | AC MOTOR CONTROLLER |
| Nominal Supply Current | 700μA |
| Output Configuration | Half Bridge (4) |
| Output Current | 1.4A |
| Voltage - Load | 2V~7V |
| Fault Protection | Over Temperature |
| Rds On (Typ) | 750m Ω |
| Motor Type | Stepper |
| Current - Peak Output | 2.5A |
| Load Type | Inductive |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LV8014T-TLM-E Overview
Cut Tape (CT) is used to package H bridge.A cost-saving measure, H bridge is included in 24-TFSOP (0.173, 4.40mm Width).In addbridge driverion, 2.7V~5.5V can be used to improve reliabilbridge drivery.H bridge circuit is put into place according to the way of Surface Mount.As long as -20°C~75°C TA operates at the right temperature, motor driver H bridge will operate normally.H bridge motor driver is pretty useful in a wide range of applications, including DC Motors, General Purpose.PCB mounting is performed using Surface Mount.Transmission lines can be terminated with a termination that matches the characteristic impedance of the line using 24 terminations.An interface using 24 pins is used to provide pronged contact.Based on its base H bridge ic number of LV8014, more closely related H bridge ics can be found.A voltage of 5V is used as the supply voltage.H bridge circuit has been incorporated with AC MOTOR CONTROLLER as its analog IC type.A maximum current is reached by output when H-bridge reaches 2.5A.Through the output and power supply pins, a current of 1.4A is flowing.It is through 24 pins that this bridge driver is able to perform its specific functions.It is equipped with outputs in the form of 2.H bridge motor drivers in the subcategory Motion Control Electronics have a wide range of similarities.The electric power supplied by 5V is used to power the electrical load.
LV8014T-TLM-E Features
Available in 24-TFSOP (0.173, 4.40mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : LV8014
Subcategory: 2.5A
LV8014T-TLM-E Applications
There are a lot of ON Semiconductor LV8014T-TLM-E Full Bridge Drivers, Half-Bridge Drivers applications.
- Optical disc drives
- Home Appliances
- VTR
- Compact Blade Servers
- V-Core
- Notebook Computers
- Bipolar stepper motor
- Quad DC motor
- Networking Microprocessor Voltage Regulators
- Voltage Regulators
