LV8044LP-TLM-H
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VFQFN |
| Number of Pins | 40 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| Applications | Camera |
| Subcategory | Motion Control Electronics |
| Technology | Bi-CMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | QUAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | LV8044 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 3 |
| Max Output Current | 600mA |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | Serial |
| Analog IC - Other Type | DISK DRIVE MOTOR CONTROLLER |
| Nominal Supply Current | 3mA |
| Output Configuration | Half Bridge (12) |
| Power Dissipation | 1.4W |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 4mA |
| Collector Emitter Voltage (VCEO) | 5V |
| Max Collector Current | 400mA |
| Voltage - Load | 2.7V~5.5V |
| Switching Frequency | 100kHz |
| Motor Type | Stepper |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 850μm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LV8044LP-TLM-H Overview
This package was designed with Tape & Reel (TR)in mind.Parts are packaged in 40-VFQFNcases.Ideally, the part should be mounted by Surface Mount.As a result, it is appropriate for the component connected to Camera.The device can supply 2.7V~5.5V volts.The operating temperature ranges from -20°C~85°C TAto -20°C~85°C TA.The motor type can be classified as Brushed DC.This part offers 40terminations.You can apply voltage at 2.7V~5.5Vto the load.In order to get the best performance from this amplifier, it should be run at 3.3V.There is Surface Mount recommended mounting method for this device.A DISK DRIVE MOTOR CONTROLLERanalog integrated circuit is employed in this device.According to the LV8044part number, the part is found.In this device, there are 40 pins.In the Motion Control Electronicsseries, it is included.3outputs are available.The motor type can be recognized as Stepper.Its maximum output current reaches 600mAto meet the operational requirements.
LV8044LP-TLM-H Features
Applications : Camera
Load voltage across the chip 2.7V~5.5V
base on LV8044 number
designed with 3 outputs
Motor Type classified as Stepper
LV8044LP-TLM-H Applications
There are a lot of ON Semiconductor LV8044LP-TLM-H motor drivers applications.
- Accurate LED current matching
- Charge pump circuits
- CHMSL (center high-mount stop lamps)
- Hospitality buildings
- High power LED street light
- Infotainment backlighting
- Industrial lighting
- Horticultural lighting
- Turn signals
- Emergency lighting
