LV8112V-MPB-H
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LSSOP (0.220, 5.60mm Width) Exposed Pad |
| Operating Temperature | -25°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e6 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | Polygonal Mirror |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Bi-CMOS |
| Voltage - Supply | 10V~35V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G44 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Output Voltage | 5.35V |
| Operating Supply Voltage | 35V |
| Power Supplies | 24V |
| Supply Voltage-Min (Vsup) | 10V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 6.5mA |
| Output Configuration | Half Bridge (3) |
| Power Dissipation | 1.7W |
| Current - Output | 2.5A |
| Logic Function | AND |
| Halogen Free | Halogen Free |
| Voltage - Load | 10V~35V |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height Seated (Max) | 1.7mm |
| Length | 15mm |
| Width | 5.6mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LV8112V-MPB-H Overview
Drivers controllers is designed with Tube package.The part is packaged in a 44-LSSOP (0.220, 5.60mm Width) Exposed Pad case.In general, it is recommended that the part be mounted by Surface Mount.I believe it is suitable for the component connected to Polygonal Mirror.10V~35V volts can be supplied by the device.This device operates at a temperature of -25°C~150°C TJ.Motors can be classified as Brushless DC (BLDC).A total of 44terminations are available in the part.Drivers controllers is possible to apply voltage to the load at the rate of 10V~35V.Drivers controllers is recommended that this amplifier be run at 24V.The recommended way to mount it is Surface Mount.Keep the part output current at 2.5A.An analog IC with the model number BRUSHLESS DC MOTOR CONTROLLERis employed in the device.Drivers controllers is a part of the Motion Control Electronics series.The driver operates from a supply voltage of 35V volts.In this case, the output voltage is maintained at 5.35V.
LV8112V-MPB-H Features
Applications : Polygonal Mirror
Load voltage across the chip 10V~35V
LV8112V-MPB-H Applications
There are a lot of ON Semiconductor LV8112V-MPB-H motor drivers applications.
- Horticultural applications
- Daytime running lights (DRLs)
- PWM generators
- Alternative to HID lights
- Hazardous application
- Outdoor area lights
- Matrix LED dimmers
- Monitoring the energy that the luminaire uses
- LED ballasts
- Handheld devices
