LV8121V-TLM-H
| Parameters | |
|---|---|
| Height | 1.5mm |
| Length | 15mm |
| Width | 5.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LSSOP (0.220, 5.60mm Width) |
| Number of Pins | 44 |
| Operating Temperature | -30°C~100°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | Fan Motor Driver |
| Subcategory | Motion Control Electronics |
| Technology | Bi-CMOS |
| Voltage - Supply | 8V~35V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LV8121 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Power Supplies | 24V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel, PWM |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (3) |
| Logic Function | AND |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 4.7mA |
| Collector Emitter Voltage (VCEO) | 35V |
| Max Collector Current | 3.5A |
| Voltage - Load | 8V~35V |
| Switching Frequency | 19.2kHz |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
LV8121V-TLM-H Overview
The design contains a Cut Tape (CT)package.44-LSSOP (0.220, 5.60mm Width)cases are included with the part.Ideally, the part should be mounted by Surface Mount.I believe it is suitable for the component connected to Fan Motor Driver.A device with a voltage range of 8V~35V volts is available.A range of -30°C~100°C TAis available for operating temperature.Motors can be classified as Brushless DC (BLDC).In this part, there are 44 terminations available.Drivers controllers is possible to apply voltage at a rate of 8V~35Vto the load.I would like to remind you that this amplifier should be operated at 24V.There is Surface Mount recommended mounting method for this device.There is an analog integrated circuit BRUSHLESS DC MOTOR CONTROLLERpresent in the device.The LV8121part number allows us to locate it.There are 44 pins on it.Drivers controllers belongs to Motion Control Electronics series.The available outputs are [0].Brushless DC (BLDC)can be recognized as a motor type.
LV8121V-TLM-H Features
Applications : Fan Motor Driver
Load voltage across the chip 8V~35V
base on LV8121 number
designed with 3 outputs
Motor Type classified as Brushless DC (BLDC)
LV8121V-TLM-H Applications
There are a lot of ON Semiconductor LV8121V-TLM-H motor drivers applications.
- Display LED backlighting
- Camcorders
- CHMSL (center high-mount stop lamps)
- Tunnel lights
- Dome
- Industrial lighting
- High power LED street light
- Multiple output capability
- Automotive applications
- Hidden coves in high-end residential settings
