LV8136V-TLM-H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-LSSOP (0.220, 5.60mm Width) |
| Number of Pins | 30 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 30 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | Appliance |
| Subcategory | Motion Control Electronics |
| Technology | Bi-CMOS |
| Voltage - Supply | 9.5V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LV8136V |
| Function | Controller - Commutation, Direction Management |
| Number of Outputs | 1 |
| Output Voltage | 5.3V |
| Max Output Current | 15mA |
| Supply Voltage-Min (Vsup) | 9.5V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 5mA |
| Output Configuration | Pre-Driver - Half Bridge (3) |
| Power Dissipation | 1.05W |
| Output Current | 10mA |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 8mA |
| Collector Emitter Voltage (VCEO) | 16.5V |
| Switching Frequency | 17kHz |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 1.3mm |
| Length | 9.75mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LV8136V-TLM-H Overview
Drivers controllers is designed with Tape & Reel (TR) package.Drivers controllers is packaged wDrivers controllersh a 30-LSSOP (0.220, 5.60mm Width) case.In most cases, it is recommended to mount the part at Surface Mount.I believe it would be suitable for the component connected to Appliance.This device is capable of supplying voltages up to 9.5V~16.5V volts.Regarding the operating temperature, it is in the range of -40°C~105°C TA°C.The motor type can be classified as Brushless DC (BLDC).A total of 30terminations are available in this part.The amplifier should be set to 15V.There is Surface Mount recommended mounting method for this device.This device utilizes the BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit.According to the LV8136Vpart number, the part is found.This device is designed with a pin count of 30.Drivers controllers belongs to the series [0].1outputs are available.Drivers controllers is maintained at 5.3V volts.Drivers controllers is possible to recognize the motor type as [0].Drivers controllers offers maximum design flexibilDrivers controllersy since Drivers controllerss output current is 10mA.In order to meet operation requirements, its maximum output current reaches [0].
LV8136V-TLM-H Features
Applications : Appliance
base on LV8136V number
designed with 1 outputs
Motor Type classified as Brushless DC (BLDC)
LV8136V-TLM-H Applications
There are a lot of ON Semiconductor LV8136V-TLM-H motor drivers applications.
- Indicator circuit
- Charge pump circuits
- General lighting
- Automotive exterior and interior lighting
- Fog lamps
- Lighting for the ambience of tunability
- Daytime running lights (DRLs)
- Telltale lights
- Matrix LED dimmers
- Human-centric lighting
