LV8498CT-TE-L-H
| Parameters | |
|---|---|
| Terminal Form | BALL |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.4mm |
| Base Part Number | LV8498 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Max Output Current | 200mA |
| Supply Voltage-Max (Vsup) | 5V |
| Power Supplies | 2.8V |
| Supply Voltage-Min (Vsup) | 2.2V |
| Interface | I2C |
| Nominal Supply Current | 500μA |
| Output Configuration | Low Side |
| Current - Output | 150mA |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 3mA |
| Collector Emitter Voltage (VCEO) | 5V |
| Max Collector Current | 200mA |
| Voltage - Load | 1.9V~5.3V |
| Motor Type | Stepper |
| Motor Type - AC, DC | Voice Coil Motor |
| Height | 250μm |
| Length | 870μm |
| Width | 1.27mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, WLBGA |
| Number of Pins | 6 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Camera |
| Subcategory | Motion Control Electronics |
| Technology | Bi-CMOS |
| Voltage - Supply | 2.2V~5V |
| Terminal Position | BOTTOM |
LV8498CT-TE-L-H Overview
This package is designed to work with [0].Parts are packaged in 6-XFBGA, WLBGAcases.A mounting position of Surface Mountis recommended for the part.Fits the component connected to Camera.In this case, the device can supply 2.2V~5V volts.Regarding the operating temperature, it is in the range of -30°C~85°C TA°C.A Voice Coil Motormotor can be classified as a type of motor.A total of 6terminations are available in this part.A voltage of 1.9V~5.3Vcan be applied to the load.The amplifier should be set to 2.8V.A Surface Mountmounting method is recommended for this product.The output current should remain at 150mA.This can be determined by looking at the LV8498 part number.There are 6 pins on it.The Motion Control Electronicsseries contains it.Currently, there are 1 outputs available.A voltage of 5.5Vis maintained at the output.Stepperrepresents the motor type.Its maximum output current reaches 200mAto meet the operational requirements.
LV8498CT-TE-L-H Features
Applications : Camera
Load voltage across the chip 1.9V~5.3V
base on LV8498 number
designed with 1 outputs
Motor Type classified as Stepper
LV8498CT-TE-L-H Applications
There are a lot of ON Semiconductor LV8498CT-TE-L-H motor drivers applications.
- Infotainment backlighting
- Dome
- CHMSL (center high-mount stop lamps)
- Automotive exterior and interior lighting
- Automotive applications
- Building technology
- Outdoor area lights
- Lighting for health and wellbeing
- Hospitality buildings
- Side marker lights
