LV8731V-TLM-H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LSSOP (0.220, 5.60mm Width) Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | BiCDMOS |
| Voltage - Supply | 0V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LV8731V |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Supply Voltage-Min (Vsup) | 9V |
| Interface | Parallel |
| Nominal Supply Current | 3.2mA |
| Output Configuration | Half Bridge (4) |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 5mA |
| Collector Emitter Voltage (VCEO) | 32V |
| Max Collector Current | 2A |
| Voltage - Load | 8V~32V |
| Motor Type | Stepper |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4, 1/16 |
| Height | 1.5mm |
| Length | 15mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LV8731V-TLM-H Overview
Drivers controllers includes a Cut Tape (CT)package.The part is packaged in a 44-LSSOP (0.220, 5.60mm Width) Exposed Pad case.Surface Mountshould be used for mounting the part.The component connected in General Purposeis compatible with it.The device can supply 0V~5.5V volts.A range of -40°C~85°C TAis available for operating temperature.A motor of this type can be categorized as Brushed DC.In this part, there are 44 terminations available.The voltage can applied to the load at the rate of 8V~32V.Drivers controllers is important to remember that this amplifier should be run at 24V.In terms of mounting, it is recommended that it be mounted in Surface Mount.The LV8731Vpart number is used to locate the part.44pins are used in its design.In the Motion Control Electronicsseries, it is included.Currently, there are 2 outputs available.The motor type can be recognized as Stepper.The maximum output current reaches 2Ato meet the operating requirements.
LV8731V-TLM-H Features
Applications : General Purpose
Load voltage across the chip 8V~32V
base on LV8731V number
designed with 2 outputs
Motor Type classified as Stepper
LV8731V-TLM-H Applications
There are a lot of ON Semiconductor LV8731V-TLM-H motor drivers applications.
- Dash
- High brightness LED lighting
- Automotive instrumentation
- Indicator circuit
- PWM generators
- Mobile phone display backlight and key light driving
- Automotive applications
- Dome
- Industrial high-bay lights
- Human-centric lighting
