LV8741V-MPB-E
| Parameters | |
|---|---|
| Lifecycle Status | LIFETIME (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LSSOP (0.220, 5.60mm Width) Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | General Purpose |
| Additional Feature | ALSO OPERATES WITH THE RANGE OF 9.5V TO 35V SUPPLY |
| Subcategory | Motion Control Electronics |
| Technology | Bi-CMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LV8741V |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Output Voltage | 35V |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | Parallel |
| Nominal Supply Current | 2.5mA |
| Output Configuration | Half Bridge (4) |
| Supply Current-Max (Isup) | 3mA |
| Voltage - Load | 9.5V~35V |
| Motor Type | Stepper |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4 |
| Height Seated (Max) | 1.7mm |
| Length | 15mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LV8741V-MPB-E Overview
This package was designed with Tubein mind.Drivers controllers comes in a 44-LSSOP (0.220, 5.60mm Width) Exposed Pad case.In most cases, it is recommended to mount the part at Surface Mount.As a result, it is appropriate for the component connected to General Purpose.There is a possibility of providing 2.7V~5.5Vvolts through the device.Regarding the operating temperature, it is in the range of -20°C~85°C TA°C.A motor of this type can be categorized as Brushed DC.There are 44 terminations available in the part.There is the option of applying the voltage to the load at the rate of 9.5V~35V.You should run this amplifier at 5V.The recommended mounting method is Surface Mount.As a result of the LV8741Vpart number, it can be found.44 pins are provided for its design.Drivers controllers is part of the series [0].Currently, there are 2 outputs available.A constant voltage is maintained at 35V.0 indicates that the motor type is [0].Controller ic has also been assigned the characteristic [0].In order to achieve the operation requirements, the maximal output current reaches [0].
LV8741V-MPB-E Features
Applications : General Purpose
Load voltage across the chip 9.5V~35V
base on LV8741V number
designed with 2 outputs
Motor Type classified as Stepper
Additional Feature: ALSO OPERATES WITH THE RANGE OF 9.5V TO 35V SUPPLY
LV8741V-MPB-E Applications
There are a lot of ON Semiconductor LV8741V-MPB-E motor drivers applications.
- PDAs
- Display LED backlighting
- Matrix LED dimmers
- Arena lighting
- RGB and monochromatic LED drivers for signage and traffic signals
- Infotainment backlighting
- Lighting for health and wellbeing
- CHMSL (center high-mount stop lamps)
- drivers for outdoor application
- PWM generators
