LV8800V-TLM-H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-LSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -30°C~95°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | Fan Motor Driver |
| Subcategory | Motion Control Electronics |
| Technology | Bi-CMOS |
| Voltage - Supply | 2.2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LV8800 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.2V |
| Interface | PWM |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 2.5mA |
| Output Configuration | Half Bridge (3) |
| Power Dissipation | 300mW |
| Output Current-Max | 0.7A |
| Halogen Free | Halogen Free |
| Collector Emitter Voltage (VCEO) | 6V |
| Max Collector Current | 700mA |
| Voltage - Load | 2.2V~6V |
| Switching Frequency | 25kHz |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 1.3mm |
| Length | 5.2mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LV8800V-TLM-H Overview
Drivers controllers is designed with Tape & Reel (TR) package.This part is packed in a 16-LSSOP (0.173, 4.40mm Width) case.In most cases, it is recommended to mount the part at Surface Mount.I believe it is suitable for the component connected to Fan Motor Driver.The device can supply 2.2V~6V volts.Regarding the operating temperature, it is in the range of -30°C~95°C TA°C.This motor type can be categorized as Brushless DC (BLDC).The part supports 16terminations.Drivers controllers is possible to apply voltage to the load at the rate of 2.2V~6V.Drivers controllers is important to note that this amplifier should be operated at the 5Vsetting.The recommended way to mount it is Surface Mount.In this device, the analog IC BRUSHLESS DC MOTOR CONTROLLERis employed.Based on the LV8800part number, it is found.16pins are available on the device.The item belongs to the Motion Control Electronics series.There are a total of 1outputs available.Brushless DC (BLDC)can be recognized as a motor type.
LV8800V-TLM-H Features
Applications : Fan Motor Driver
Load voltage across the chip 2.2V~6V
base on LV8800 number
designed with 1 outputs
Motor Type classified as Brushless DC (BLDC)
LV8800V-TLM-H Applications
There are a lot of ON Semiconductor LV8800V-TLM-H motor drivers applications.
- Lighting for the ambience of tunability
- Handheld devices
- Building technology
- Daytime running lights (DRLs)
- High brightness LED lighting
- Multiple output capability
- LED bias
- Automotive applications
- Mobile phone display backlight and key light driving
- RGB and monochromatic LED drivers for signage and traffic signals
