LV8804FV-TRM-H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -30°C~95°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Bi-CMOS |
| Voltage - Supply | 6V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LV8804 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Max Output Current | 1.2A |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Analog IC - Other Type | AC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (3) |
| Power Dissipation | 300mW |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 4mA |
| Collector Emitter Voltage (VCEO) | 15V |
| Max Collector Current | 1.2A |
| Voltage - Load | 6V~15V |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 1.3mm |
| Length | 5.2mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LV8804FV-TRM-H Overview
The package contains [0].A 20-LFSOP (0.173, 4.40mm Width)case is included with the part.In most cases, it is recommended to mount the part at Surface Mount.I believe it is suitable for the component connected to General Purpose.The device can supply 6V~15V volts.With regard to operating temperature, it ranges -30°C~95°C TA. The motor type can be classified as Brushless DC (BLDC).A total of 20terminations are available in this part.There is the option of applying the voltage to the load at the rate of 6V~15V.In order to get the best performance from this amplifier, it should be run at 12V.The recommended mounting method is Surface Mount.In this device, the analog IC AC MOTOR CONTROLLERis employed.LV8804is the part number that finds it.This device is designed with a pin count of 20.In the Motion Control Electronicsseries, it is included.Drivers controllers is possible to access 1outputs.The motor type can be recognized as Brushless DC (BLDC).As a result, the maximum output current reaches 1.2Ain order to meet the requirements of the operation.
LV8804FV-TRM-H Features
Applications : General Purpose
Load voltage across the chip 6V~15V
base on LV8804 number
designed with 1 outputs
Motor Type classified as Brushless DC (BLDC)
LV8804FV-TRM-H Applications
There are a lot of ON Semiconductor LV8804FV-TRM-H motor drivers applications.
- PWM generators
- Outdoor area lights
- Camcorders
- Scanning equipment
- Daytime running lights (DRLs)
- Lighting for the ambience of tunability
- Multiple output capability
- Automotive instrumentation
- Commercial office
- CHMSL (center high-mount stop lamps)
