LV8806QA-MH
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFQFN |
| Number of Pins | 16 |
| Weight | 40.908362mg |
| Operating Temperature | -40°C~95°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Max Power Dissipation | 800mW |
| Technology | Bi-CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | QUAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 50kHz |
| Base Part Number | LV8806 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 3 |
| Output Voltage | 7V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | PWM |
| Analog IC - Other Type | AC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (3) |
| Logic Function | AND |
| Output Current-Max | 0.7A |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 2.5mA |
| Collector Emitter Voltage (VCEO) | 6V |
| Max Collector Current | 700mA |
| Voltage - Load | 2V~6V |
| Switching Frequency | 50kHz |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 500μm |
| Length | 2.6mm |
| Width | 2.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LV8806QA-MH Overview
Drivers controllers includes a Cut Tape (CT)package.There is 16-UFQFN case included with the part.In general, it is recommended that the part be mounted by Surface Mount.The component connected in General Purposeis compatible with it.There is a possibility of providing 2V~6Vvolts through the device.This device operates at a temperature of -40°C~95°C TA.This motor type can be categorized as Brushless DC (BLDC).The part has 16terminations available.Drivers controllers is possible to apply voltage to the load at the rate of 2V~6V.Drivers controllers is recommended that this amplifier be run at 5V.In terms of mounting, it is recommended that it be mounted in Surface Mount.The device employs the AC MOTOR CONTROLLER analog IC.This can be determined by looking at the LV8806 part number.A device with 16pins is available.The item belongs to the Motion Control Electronics series.3outputs are available.A constant voltage is maintained at 7V.0 indicates that the motor type is [0].In this case, the frequency is 50kHz.
LV8806QA-MH Features
Applications : General Purpose
Load voltage across the chip 2V~6V
base on LV8806 number
designed with 3 outputs
Motor Type classified as Brushless DC (BLDC)
LV8806QA-MH Applications
There are a lot of ON Semiconductor LV8806QA-MH motor drivers applications.
- Commercial office
- Automotive instrumentation
- Lighting for the ambience of tunability
- Brake lights
- Hidden coves in high-end residential settings
- PDAs
- Industrial high-bay lights
- Indicator
- Street lights
- General lighting
