LV8860V-TLM-H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-LSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~95°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | Fan Motor Driver |
| Additional Feature | ALSO OPERATES IN 6 TO 34V SUPPLY |
| Subcategory | Motion Control Electronics |
| Technology | Bi-CMOS |
| Voltage - Supply | 6V~34V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LV8860 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Max Output Current | 700mA |
| Power Supplies | 24V |
| Supply Voltage-Min (Vsup) | 7V |
| Interface | Parallel, PWM |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 1.7mA |
| Output Configuration | Half Bridge (2) |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 3.5mA |
| Collector Emitter Voltage (VCEO) | 34V |
| Max Collector Current | 700mA |
| Voltage - Load | 6V~34V |
| Switching Frequency | 50kHz |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushed DC |
| Height | 1.3mm |
| Length | 5.2mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LV8860V-TLM-H Overview
The design includes a package of type [0].This part is packaged with a case of [0].In general, it is recommended that the part be mounted by Surface Mount.The component connected in Fan Motor Drivermatches it perfectly.A device with a voltage range of 6V~34V volts is available.With regard to operating temperature, it ranges -40°C~95°C TA. Drivers controllers is possible to classify the motor type as Brushed DC.A total of 16terminations are available in the part.Drivers controllers is possible to apply voltage at a rate of 6V~34Vto the load.Drivers controllers is recommended that this amplifier be run at 24V.There is Surface Mount recommended mounting method for this device.A BRUSH DC MOTOR CONTROLLERanalog IC is employed in this device.Drivers controllers is based on the LV8860 part number.Drivers controllers is designed wDrivers controllersh 16 pins.Drivers controllers belongs to the Motion Control Electronics series.There are 1 outputs available.Brushless DC (BLDC)represents the motor type.The characteristic of ALSO OPERATES IN 6 TO 34V SUPPLYis also present.For compliance with the operation requirements, the maximum output current is [0].
LV8860V-TLM-H Features
Applications : Fan Motor Driver
Load voltage across the chip 6V~34V
base on LV8860 number
designed with 1 outputs
Motor Type classified as Brushless DC (BLDC)
Additional Feature: ALSO OPERATES IN 6 TO 34V SUPPLY
LV8860V-TLM-H Applications
There are a lot of ON Semiconductor LV8860V-TLM-H motor drivers applications.
- Automotive exterior and interior lighting
- High brightness LED lighting
- Hidden coves in high-end residential settings
- Home lighting systems
- CHMSL (center high-mount stop lamps)
- Horticultural applications
- Turn signals
- Telltale lights
- PWM generators
- Camera-enabled smartphones
