LYT0004D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2013 |
| Series | LYTSwitch™-0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 54V |
| Max Output Current | 139mA |
| Output Current | 139mA |
| Max Supply Current | 173μA |
| Max Output Voltage | 700V |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Output Current per Channel | 225mA |
| Min Output Voltage | -300mV |
| Internal Switch(s) | Yes |
| Switching Frequency | 66kHz |
| Voltage - Supply (Max) | 308VAC |
| Voltage - Supply (Min) | 85VAC |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 308V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LYT0004D Overview
The 8-SOIC (0.154, 3.90mm Width), 7 Leads package is used for saving board space. For the design of these LED drivers, 1 outputs are used.The led light driver is mounted using Surface Mount.With high efficiency, it emerges as a AC DC Offline Switcher.The led light driver can work at -40°C~125°C TJ.The LED light driver has a base configuration of 7 pins.Failures may occur if the voltage supply is below 85VAC.Surface Mount is mounted on it.5 pins are on the device.An optimized supply voltage of 308VAC is provided.A minimal supply current is required in order for this device to provide high efficiency.139mA is the maximum current the load can handle.This electronic component may perform its functions fully if the switching frequency is maintained at 66kHz.When operating at the maximum output current of 139mA, it is capable of providing all the benefits associated with LED drivers.This LED driver belonging to the LYTSwitch?-0 series is a key component for a broad range of applications.This device produces a voltage of 54V as its output.It is not recommended to exceed 700V in the output voltage.-300mV is the minimal voltage it outputs.
LYT0004D Features
Available in the 8-SOIC (0.154, 3.90mm Width), 7 Leads package
Operating temperature of -40°C~125°C TJ
Switching frequency of 66kHz
Output voltage of 54V
LYT0004D Applications
There are a lot of Power Integrations LYT0004D LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- LED Lightings for Industrial Equipment
- General lighting
- OLED power supply for portable equipment
- Industrial LED Lighting: Image Recognition Devices
- Auxiliary lights for on-vehicle cameras
- Down lighting
- Street lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Stage Lighting and Signage
