M2S005S-TQ144I
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 month ago) |
| Package / Case | 144-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2015 |
| Series | SmartFusion®2 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | S-PQFP-G144 |
| Number of Outputs | 84 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 1.26V |
| Power Supplies | 1.2V |
| Supply Voltage-Min (Vsup) | 1.14V |
| Number of I/O | 84 |
| Speed | 166MHz |
| RAM Size | 64KB |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | DDR |
| Connectivity | CANbus, Ethernet, I2C, SPI, UART/USART, USB |
| Architecture | MCU, FPGA |
| Number of Inputs | 84 |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Primary Attributes | FPGA - 5K Logic Modules |
| Number of Logic Cells | 6060 |
| Flash Size | 128KB |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | Non-RoHS Compliant |
This SoC is built on ARM? Cortex?-M3 core processor(s).
A core processor ARM? Cortex?-M3 is used to build this SoC.It has been assigned a package 144-LQFP by its manufacturer for this system on a chip.With 64KB RAM implemented, this SoC chip provides users with reliable performance.As far as its internal architecture is concerned, this SoC design employs the MCU, FPGA technique.SmartFusion?2 is the series name of this system on chip SoC.In general, this SoC meaning should operate at a temperature of -40°C~100°C TJ on a regular basis.In addition, this SoC security combines FPGA - 5K Logic Modules.An advanced Tray package houses this SoC system on a chip.This SoC part has a total of 84 I/Os.It is recommended to use a 1.2V power supply.The SoCs wireless cannot operate at a voltage greater than 1.26V because it is considered unsafe for the application.As long as it receives a power supply that is at least 1.14V, it should be able to function.The FIELD PROGRAMMABLE GATE ARRAY can be reconfigured to meet a variety of design requirements.There are 144 terminations in total and that really benefits system on a chip.Just like other high-quality Field Programmable Gate Arrays will do, it is of outstanding system on a chip capability.A SoC chip with 84 outputs is available.System on chip requires 1.2V power supplies.On the SoC chip, there are 84 inputs available for use.System on chips of logic are comprised of 6060 logic cells.The flash is set to 128KB.
ARM? Cortex?-M3 processor.
64KB RAM.
Built on MCU, FPGA.
128KB extended flash.
There are a lot of Microsemi Corporation
M2S005S-TQ144I System On Chip (SoC) applications.
- Defense
- Functional safety for critical applications in the automotive
- Video Imaging
- External USB hard disk/SSD
- Servo drive control module
- High-end PLC
- Vending machines
- ARM Cortex M4 microcontroller
- Central alarm system
- Multiprocessor system-on-chips (MPSoCs)
