M2S010-TQ144I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | OBSOLETE (Last Updated: 2 days ago) |
| Package / Case | 144-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2015 |
| Series | SmartFusion®2 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | S-PQFP-G144 |
| Number of Outputs | 84 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 1.26V |
| Power Supplies | 1.2V |
| Supply Voltage-Min (Vsup) | 1.14V |
| Number of I/O | 84 |
| Speed | 166MHz |
| RAM Size | 64KB |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | DDR, PCIe, SERDES |
| Connectivity | CANbus, Ethernet, I2C, SPI, UART/USART, USB |
| Architecture | MCU, FPGA |
| Number of Inputs | 84 |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Primary Attributes | FPGA - 10K Logic Modules |
| Flash Size | 256KB |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | Non-RoHS Compliant |
This SoC is built on ARM? Cortex?-M3 core processor(s).
Based on the core processor(s) ARM? Cortex?-M3, this SoC is built.Package 144-LQFP is assigned to this system on a chip by the manufacturer.The 64KB RAM implementation of this SoC chip ensures efficient performance for users.The internal architecture of this SoC design is based on the MCU, FPGA technique.SmartFusion?2 is the series name of this system on chip SoC.As a rule of thumb, the average operating temperature for this SoC meaning should be -40°C~100°C TJ.Taking note of the fact that this SoC security combines FPGA - 10K Logic Modules is important.This SoC system on a chip has been designed in a state-of-the-art Tray package.As a whole, this SoC part is comprised of 84 inputs and outputs.It is advised to utilize a 1.2V power supply.There are voltages higher than 1.26V that should be avoided when using the SoCs wireless.As a minimum, the power supply of the SoC system on a chip needs to be 1.14V.It is possible to configure FIELD PROGRAMMABLE GATE ARRAY to meet specific needs during the design process.The system on a chip uses 144 terminations in total.Just like other high-quality Field Programmable Gate Arrays will do, it is of outstanding system on a chip capability.In order for this SoC chip to work properly, you can have 84 outputs.There is 1.2V power supply required for system on chip.This SoC chip has a total of 84 inputs that can be used.The flash size of the SoC meaning is 256KB.
ARM? Cortex?-M3 processor.
64KB RAM.
Built on MCU, FPGA.
256KB extended flash.
There are a lot of Microsemi Corporation
M2S010-TQ144I System On Chip (SoC) applications.
- Fitness
- High-end PLC
- Embedded systems
- Defense
- POS Terminals
- Sensor network-on-chip (sNoC)
- Communication network-on-Chip (cNoC)
- Remote control
- External USB hard disk/SSD
- Industrial robot
