M2S100-1FC1152I
| Parameters | |
|---|---|
| Number of Inputs | 574 |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Core Architecture | ARM |
| Primary Attributes | FPGA - 100K Logic Modules |
| Number of Logic Cells | 99512 |
| Flash Size | 512KB |
| Height Seated (Max) | 2.9mm |
| Length | 35mm |
| Width | 35mm |
| RoHS Status | Non-RoHS Compliant |
| Package / Case | 1152-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2009 |
| Series | SmartFusion®2 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Terminal Finish | TIN LEAD |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M2S100 |
| JESD-30 Code | S-PBGA-B1152 |
| Number of Outputs | 574 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 1.26V |
| Power Supplies | 1.2V |
| Supply Voltage-Min (Vsup) | 1.14V |
| Interface | CAN, Ethernet, I2C, SPI, UART, USART, USB |
| Number of I/O | 574 |
| RAM Size | 64KB |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | DDR, PCIe, SERDES |
| Connectivity | CANbus, Ethernet, I2C, SPI, UART/USART, USB |
| Architecture | MCU, FPGA |
This SoC is built on ARM? Cortex?-M3 core processor(s).
There are ARM? Cortex?-M3 core processors in this SoC.There is a 1152-BBGA, FCBGA package assigned to this system on a chip by the manufacturer.With 64KB RAM implemented, this SoC chip provides users with a high level of performance.This SoC design employs the MCU, FPGA technique for its internal architecture.It is a member of the SmartFusion?2 series.In general, this SoC meaning should operate at a temperature of -40°C~100°C TJ on a regular basis.One important thing to mark down is that this SoC meaning combines FPGA - 100K Logic Modules.It comes in a state-of-the-art Tray package.As a whole, this SoC part includes 574 I/Os.It is recommended to use a 1.2V power supply.An excessive voltage of 1.26V is considered unsafe for the SoCs wireless, so voltages higher than that are not allowed.In order to run it, it must be fed by at least 1.14V of power.Depending on your specific needs, FIELD PROGRAMMABLE GATE ARRAY can be re-configured.This system on a chip is just as capable as any other high-quality Field Programmable Gate Arrays.There are 574 outputs available on this SoC.System on chip requires 1.2V power supplies.The SoC chip is equipped with 574 inputs.The logic SoC features 99512 logic cells.This flash has a size of 512KB.A search for M2S100 will result in system on chips that have similar specs and purposes.At 166MHz, the wireless SoC works.Based on the core architecture of ARM, the SoC meaning has a high level of performance.
ARM? Cortex?-M3 processor.
64KB RAM.
Built on MCU, FPGA.
512KB extended flash.
Core Architecture: ARM
There are a lot of Microsemi Corporation
M2S100-1FC1152I System On Chip (SoC) applications.
- Microcontroller
- Industrial robot
- Automotive
- Mobile computing
- Robotics
- Measurement tools
- Transmitters
- Vending machines
- Apple smart watch
- Microprocessors
