M40SZ100WMQ6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M40SZ |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Power Supplies | 3/3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 1W |
| Max Supply Current | 500μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.6V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 40ms Minimum |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M40SZ100WMQ6F Overview
There are 16 terminals connected to this power management, which makes it easy to mount. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 1 channels. Please refer to power management for 16-SOIC (0.154, 3.90mm Width) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 3V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 16 pins that are attached to IC management. 16 pins make up the power management. There should be a minimum voltage supply (Vsup) of 2.7V for this PMIC. There should be no more than 3.6V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~85°C TA . When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 500μA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to M40SZ, the base PMIC number. To operate this power management, you will need at least 3/3.3V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 500μA.
M40SZ100WMQ6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
500μA operating supply current
M40SZ100WMQ6F Applications
There are a lot of STMicroelectronics M40SZ100WMQ6F Voltage Supervisors applications.
- Efficient information transmission
- FPGA design
- Automotive power systems
- Power distribution systems of infant care room
- Utility meter
- WiFi router
- Medical-specific isolation transformer
- External alarm
- Detection of phase loss
- Electronics installed in the vehicle
